The service adapter is used for quick parameterization of the control device.
The adapter is plugged directly into the COM port of the controller (if a COM base is available, the ribbon cable must be disconnected beforehand)
The adapter is suitable for all control devices with a 10 or 14-pin COM connection.

The parameter tool can be obtained on the homepage www.schneid.at under ´´Download´´.

Scope of delivery:
SCHNEID service adapter RADIO
SCHNEID antenna for plug-in card module CM08-RFx
Micro USB cable.

Dimensions (HxWxD): PU 180x110x15mm